RELEASER™, RELEASE CRETE™
General Purpose Release Agents
Releaser Product Description
RELEASER™ is a petrochemical formulation that has benefits that are unavailable from any competitive release agent. Releaser has a pH of 7, which means that it is absolutely neutral. Therefore, it will not act as a retarding agent as do some other types of release agents. Elimination of this retarding effect means that the surface of the cast concrete unit is completely unaffected by the release agent.
Releaser Application Information
For mixers, Releaser should be applied daily to the clean metal surface with spray, brush or rag. Releaser may be applied by roller, spray or brush. Releaser may be diluted one to one with fuel oil for economy. Note that highly volatile solvents such as mineral spirits are not recommended.
Packaging:
Releaser comes in drums
Health & Safety:
All precautions defined on the SDS (Safety Data Sheet) for Releaser and the solvent used to dilute must be followed.
Quantity Required:
Releaser will coat approximately 20-25 m2/L (800-1,000 ft2/gal) on steel, aluminum and fiberglass and 15-20 m2/L (600-800 ft2/ gal) on wood.
Product Advantages
- Offers maximum protection to steel, aluminum, wood and fiberglass forms
- Cast concrete unit will not discolor
- Minimizes the residue that prevent bonding of paint to cast pieces
- Will not wash off due to rain
- Displaces water
- Spraying daily on tools and equipment will soften old concrete build-up
Release Crete Product Description
RELEASE CRETE™ is a high quality chemical action-type release agent for use on all types of forms used for concrete. It is also extremely effective when used to prevent concrete from bonding to form surfaces as well as mixers, pallets, tools and wheelbarrows.
Release Crete Application Information
Apply Release Crete lightly on clean form surfaces before each pour. Release Crete may be applied by brush, roller-rag or spray. Release Crete may be diluted with one to two parts fuel oil for economy. Note that highly volatile solvents such as mineral spirits are not recommended.
Packaging:
Release Crete comes in drums
Health & Safety:
All precautions defined on the SDS (Safety Data Sheet) for Release Crete and the solvent used to dilute must be followed.
Quantity Required:
Release Crete (undiluted) will cover approximately 25 m2/L (1,000 ft2/gal) of metal form or 18 m2/L (750 ft2/gal)
of wood form.
Warning
The hazards defined on the (SDS) Safety Data Sheet for these Release Agents will change significantly when diluted with any organic solvent. Additional precautions are required to avoid inhalation during spray applications and will normally include respiratory protection. Spray application of Release Agents diluted with any low flash point solvent may create the possibility of explosive airborne concentrations. Appropriate precautions will vary with actual job site conditions.
Refer to the SDS for each specific product and solvent prior to use. Consult local air quality regulations to assure that any solvent diluted Release Agent complies with applicable VOC regulations.
gcpat.it | Servizio clienti in Italia:: +39 02 93537291
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
Releaser and Release Crete are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2016 GCP Applied Technologies Inc. All rights reserved.
GCP0083 MP-088_1116
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Italiana S.p.A. - Via Trento, 7 - 20017 Passirana di Rho, Milano, Italy
Questo documento è aggiornato solo a partire dalla data dell’ultimo indicato di seguito ed è valido solo per l'uso in Italia. È importante consultare sempre le informazioni attualmente disponibili sull'URL.di seguito per avere le informazioni sul prodotto più recenti al momento dell'uso. Documenti aggiuntivi come i manuali di utilizzo, bollettini tecnici, disegni dettagliati e raccomandazioni dettagliate e altri documenti rilevanti sono disponibili anche su www.gcpat.fr. Le informazioni trovate su altri siti web non dovrebbero essere utilizzati, in quanto potrebbero non essere aggiornati o applicabili alle condizioni del tuo paese e non ci assumiamo alcuna responsabilità quanto al loro contenuto. In caso di conflitti o se hai bisogno di ulteriori informazioni, contatta il servizio clienti di GCP.
Last Updated: 2023-06-15
https://gcpat.it/it-it/solutions/products/releaser-release-crete