DARATARD® 17

Set retarding admixture ASTM C494 Type B and D

DownloadPdf
Inserisci

Product Description

DARATARD® 17 admixture is a ready-to-use aqueous solution of hydroxylated organic compounds. Ingredients are factory pre-mixed in exact proportions to minimize handling, eliminate mistakes and guesswork. Daratard 17 admixture weighs approximately 10.2 lbs/gal (1.17 kg/L).

Uses

Daratard 17 retards the initial and final set of concrete. At the usual addition rate of 3 fl oz/100 lbs (195 mL/100 kg) cement, it will extend the initial setting time of Portland cement concrete by 2 to 3 hours at 70 °F (21 °C). Daratard 17 is used wherever a delay in setting time will insure sufficient delivery, placement, vibration or compaction time, such as in:

  • Hot weather concreting
  • Transit mix concrete
  • Prestressed concrete
  • Daratard 17 is also used in special applications, as in bridge decks where it extends plastic characteristics of the concrete until progressive deflection resulting from increasing loads is completed.

Addition Rates

Addition rates for Daratard 17 will range from 2 to 8 fl oz/100 lbs (130 to 520 mL/100 kg) of cement. The amount to be used will depend upon the degree of retardation required under job conditions. Longer setting times or higher temperatures will require higher addition rates. Conversely, the addition rate will be lower for shorter extensions of time.

Compatibility with Other Admixtures and Batch Sequencing

Daratard 17 is compatible with most GCP admixtures as long as they are added separately to the concrete mix, usually through the water holding tank discharge line. In general, it is recommended that Daratard 17 be added to the concrete mix near the beginning of the batch sequence but after the cement and water is combined for optimum performance. Different sequencing may be used if local testing shows better performance. Please see GCP Technical Bulletin TB-0110, Admixture Dispenser Discharge Line Location and Sequencing for Concrete Batching Operations for further recommendations.

Pretesting of the concrete mix should be performed before use, as conditions and materials change in order to assure compatibility, and to optimize dosage rates, addition times in the batch sequencing and concrete performance. For concrete that requires air entrainment, the use of an ASTM C260 air-entraining agent (such as DARAVAIR® or DAREX® product lines) is recommended to provide suitable air void parameters for freeze-thaw resistance. Please consult your GCP Applied Technologies representative for guidance.

Packaging & Handling

Daratard 17 is available in bulk, delivered by metered tank trucks, totes and drums.

Daratard 17 will freeze at about 28 °F (-2 °C), but will return to full strength after thawing and thorough agitation.

Dispensing Equipment

A complete line of accurate, automatic dispensing equipment is available. Daratard 17 may be introduced to the mix with the sand or with the water.

Specifications

Concrete shall be designed in accordance with Standard Recommended Practice for Selecting Proportions for Concrete, ACI 211.1.

The set-retarding/water-reducing admixture shall comply with ASTM Designation C494, Type D admixture, and shall be Daratard 17, as manufactured by GCP Applied Technologies, or equal. Certification of compliance shall be made available on request. It shall be used in strict accordance with the manufacturers’ recommendations.

The addition rate shall be adjusted to produce the specified retardation of the concrete mix at all temperatures.

gcpat.it | Servizio clienti in Italia:: +39 02 93537291

Confidiamo che le informazioni date con la presente siano utili. Sono basate su dati e conoscenze che riteniamo vere ed accurate e sono messe a disposizione dell’utente perché li consideri, facendo le opportune verifiche. Tali informazioni non rientrano nei nostri obblighi quali fornitori e per esse nessun compenso, esplicito o implicito, viene richiesto e/o viene dato. Anche per questo non assumiamo alcuna responsabilità per l’uso di tali informazioni e per i risultati che possono essere ottenuti. Nessuna informazione, raccomandazione o suggerimento può essere intesa ad un impiego in un processo che violi qualsiasi brevetto, copyright o diritto di terzi.

DARATARD sono marchi registrati della GCP Applied Technologies Inc in USA o in altri stati. Questa lista di marchi registrati è stata composta usando le informazioni disponibili alla data di pubblicazione e potrebbero non riflettere accuratamente la proprietà o lo status di essi.

© Copyright 2017 GCP Applied Technologies Inc. Tutti i diritti riservati. 


GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Italiana S.p.A. - Via Trento, 7 - 20017 Passirana di Rho, Milano, Italy
Questo documento è aggiornato solo a partire dalla data dell’ultimo indicato di seguito ed è valido solo per l'uso in Italia. È importante consultare sempre le informazioni attualmente disponibili sull'URL.di seguito per avere le informazioni sul prodotto più recenti al momento dell'uso. Documenti aggiuntivi come i manuali di utilizzo, bollettini tecnici, disegni dettagliati e raccomandazioni dettagliate e altri documenti rilevanti sono disponibili anche su www.gcpat.fr. Le informazioni trovate su altri siti web non dovrebbero essere utilizzati, in quanto potrebbero non essere aggiornati o applicabili alle condizioni del tuo paese e non ci assumiamo alcuna responsabilità quanto al loro contenuto. In caso di conflitti o se hai bisogno di ulteriori informazioni, contatta il servizio clienti di GCP.

Last Updated: 2023-06-14

https://gcpat.it/it-it/solutions/products/daratard-17-0